From pushing trash to spreading cover, and cell construction to closing, Cat® Waste Handlers are designed and manufactured from the frame up to take on the demands of landfill work.
| Engine | |
|---|---|
| Engine Model | Cat C15 ACERT™ |
| Flywheel Power | 335 HP / 252 kW |
| Bore | 5.4 in / 137 mm |
| Stroke | 6.75 in / 172 mm |
| Displacement | 928 in³ / 15.2 l |
| Net Power - 1,900 rpm - ISO 9249/SAE J1349 (DIN) | 317 HP / 233 kW |
| Net Power - Maximum - ISO 9249/SAE J1349 DIN at 1,700 rpm | 343 HP / 252 kW |
| Net Power - 1,900 rpm - ISO 9249/SAE J1349 | 312 HP / 233 kW |
| Net Power - Maximum - ISO 9249/SAE J1349 at 1,700 rpm | 335 HP / 252 kW |
| Note (3) | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.5 kg of refrigerant which has a CO2 equivalent of 3.575 metric tonnes. |
| Emissions | Tier 4 Final/Stage IV/Korea Tier 4 |
| Note (2) | Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. |
| Note (1) | All non road Tier 4 Interim and Final, Stage IIIB and IV, and Korea Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations. |
| Weights | |
|---|---|
| Operating Weight | 86710 lb / 39366 kg |
| Shipping Weight | |
|---|---|
| Standard Waste Handler | 73400 lb / 33324 kg |
| LGP Waste Handler | 77900 lb / 35367 kg |
| Operating Weights | |
|---|---|
| LGP Waste Handler | 91600 lb / 41586 kg |
| Standard Waste Handler | 86710 lb / 39366 kg |
| Dimensions - Standard | |
|---|---|
| Machine Height - Grouser Tip - Exhaust Stack | 136.7 in / 3472 mm |
| Machine Height - Grouser Tip - Length of Track on Ground | 126.2 in / 3206 mm |
| Height - Top of Roof-Mounted Precleaner | 145.2 in / 3706 mm |
| Width - Tractor - Over Trunnions | 120.4 in / 3057 mm |
| Machine Height - Grouser Tip - EROPS (Top of Railing) | 140.4 in / 3566 mm |
| Track Gauge | 82 in / 2083 mm |
| Height - Grouser | 3.1 in / 78 mm |
| Machine Height - Grouser Tip - Ground Clearance | 24.1 in / 613 mm |
| Length - Basic Tractor - With Striker Bars with Two Counterweights* | 206.4 in / 5256 mm |
| Without Trunnions - Standard Shoe Width | 106 in / 2693 mm |
| Length - Basic Tractor - Tag Link Trunnion to Tip - Rear Grouser* | 183 in / 4647 mm |
| Note | *With the following attachments add: SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; Drawbar 406 mm/16.0 in. |
| Dimensions - LGP | |
|---|---|
| Without Trunnions - Standard Shoe Width | 130 in / 3302 mm |
| Length - Basic Tractor - Tag Link Trunnion to Tip - Rear Grouser* | 183 in / 4647 mm |
| Width - Tractor - Over Trunnions | 130.4 in / 3311 mm |
| Length - Basic Tractor - With Striker Bars with Two Counterweights* | 206.4 in / 5256 mm |
| Height - Top of Roof-Mounted Precleaner | 145.2 in / 3706 mm |
| Track Gauge | 92 in / 2337 mm |
| Machine Height - Grouser Tip - Exhaust Stack | 129.7 in / 3295 mm |
| Height - Grouser | 3.1 in / 78 mm |
| Machine Height - Grouser Tip - Ground Clearance | 24.1 in / 613 mm |
| Machine Height - Grouser Tip - Length of Track on Ground | 126.2 in / 3206 mm |
| Note | *With the following attachments add: SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; Drawbar 406 mm/16.0 in. |
| Machine Height - Grouser Tip - EROPS (Top of Railing) | 140.4 in / 3566 mm |
| Dimensions - Non-Suspended | |
|---|---|
| Machine Height - Grouser Tip - Ground Clearance | 23.8 in / 606 mm |
| Height - Top of Roof-Mounted Precleaner | 145.2 in / 3706 mm |
| Machine Height - Grouser Tip - Length of Track on Ground | 128.3 in / 3258 mm |
| Height - Grouser | 3.1 in / 78 mm |
| Note | *With the following attachments add: SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; Drawbar 406 mm/16.0 in. |
| Machine Height - Grouser Tip - EROPS (Top of Railing) | 140.7 in / 3575 mm |
| Track Gauge | 82 in / 2083 mm |
| Machine Height - Grouser Tip - Exhaust Stack | 136.3 in / 3463 mm |
| Width - Tractor - Over Trunnions | 120.4 in / 3057 mm |
| Length - Basic Tractor - With Striker Bars with Two Counterweights* | 206.4 in / 5256 mm |
| Without Trunnions - Standard Shoe Width | 106 in / 2693 mm |
| Length - Basic Tractor - Tag Link Trunnion to Tip - Rear Grouser* | 183 in / 4647 mm |
| Blades - Capacity (SAE J1265) | |
|---|---|
| 8 U Landfill | 27.7 yd³ / 21.2 m³ |
| 8 SU LGP Landfill | 28.9 yd³ / 22.1 m³ |
| 8 SU Landfill | 25.6 yd³ / 19.6 m³ |
| Blades - Width - Over End Bits | |
|---|---|
| 8 SU LGP Landfill | 14.9 ft / 4531 mm |
| 8 SU Landfill | 12.9 ft / 3931 mm |
| 8 U Landfill | 13.9 ft / 4251 mm |
| Transmission | |
|---|---|
| 2 Forward | 3.8 mile/h / 6.1 km/h |
| 1 Reverse | 2.8 mile/h / 4.5 km/h |
| 3 Forward | 6.6 mile/h / 10.6 km/h |
| 3 Reverse | 8.8 mile/h / 14.2 km/h |
| 1 Forward | 2.1 mile/h / 3.4 km/h |
| 2 Reverse | 5 mile/h / 8 km/h |
We'll do our best to get back to you as soon as possible.
